Golf is a game that is originated from Scottish roots. It is the most popular game in the world. This exciting game that is popular among random players and professionals as well only revolves around a small ball, i.e., a small golf ball.
Only this ball is the thing that will decide the fate of your scoreboard. Also, how keenly you handle it, of course. But being a golf enthusiast, do you have any idea how this golf ball is processed and the steps involved in how golf balls are made.
Don’t have any idea? But it is quite sure that being a golf player, it is evident that you spend most of your time with this ball and want to know its internal layers. Isn’t it so? So let’s dig a little deeper about the manufacturing process of golf balls.
Here in this article, we have mentioned all of the crucial points and manufacturing processes in depth. Plus, we have tried to make your mind clear by answering all of the golf ball queries. Let get begun and see what we have got next.
How golf balls are made? The manufacturing of golf balls
Here we will tell you about the Golf ball construction in a step-by-step manner.
Making this small-looking golf ball is quite a complex process that takes almost 30 days to complete. Also, lots of steps are involved along with the inspection of the quality.
First of all, the center of the ball is the main focus.
What’s inside a golf ball?

A moulded core or the center of the golf ball is the thing that you will come to see as the very first layer. To produce this core material, several ingredients are blended in a specific manner.
The resultant is a rubber-type material that is almost 1.5 cm only. The golf ball’s core is to try to keep as much round and complete as much as possible. It is the main thing on which the outer layers of the ball depend.
Plus, the core also defines the ergonomics and the travel speed of the golf ball.
1. Now comes the outer covering
A moulding made up of specific material is used to make the outer covering of the golf ball. The moulding is held with their centre cavity with the help of strong pins.
After this, a specific type of thermoplastic is injected inside the cavity. With the help of pressure and heat, this moulding thermoplastic and core are adjusted with one another.
Once the plastic hardens and sets in place, the extra pins are removed, and the ball is ready for further processing.
2. Dimpling
Dimpling is the next process. In this process, specific dimples are added to the outermost surface so that they may reduce the friction and make your game smooth and scoreboard shinning. Also, the flight wake is reduced with these dimples. The number of dimples depends upon the model and type of golf ball.
3. Polishing and painting
Now comes the touch-up. All of the bumps and irregular textures due to inserted pins are levelled by applying the polish in this step. A double coating of paint is used to give it a complete look.
The ball is placed on a revolving pivot and gives an even coat of spray paints on the outer surface. An even shinny surface is sustained on the outer coat after this step.
4. Final coating
In this coating, a polishing paint is applied that adds gloss to your golf ball. Now the logo of the specific company is imprinted on the ball to send it for further processing.
Now the ball is almost completely shinny and scuff-free. This shiny ball with dimples on it will be your perfect partner in the golf ground and help you mark a spot in the golf players.
5. Drying
In order to ensure that not a single spot of wet paint is left on the ball, the manufactured balls are placed in large containers. There the balls are left for some time, and it is ensured that balls are all dried and have a uniform texture overall.
6. Packaging
The final step before supply the balls at the retails is the packaging. The balls are packed explicitly in attractive coats and boxes. Balls are packed in an economical yet less space-consuming pattern so that they can be delivered quickly from place to place.
Quality of the golf balls

The maintenance of the golf balls’ quality is what companies do on the top verge. The reason behind this is the satisfaction of the buyers and maintenance of the player’s score.
The completely manufactured ball is observed under X-rays to make sure whether or not the Centre is entirely round and is fixed and adjusted with the outer covering or not. Also, it is checked that the balls are accurate enough to meet USGS standards or not.
Mechanical testing of golf balls is done using several machines. Maximum tense is applied to the ball to ensure that it is accurate to bear the tensile shear and energetic shots.
Plus, ball launchers are used to check how much is propelling that ball is. This shows that how effective the ball will be on the game field.
Many other points like apogee angle, maximum distance covered, and compressibility are also checked before supplying them to the retails. Ergonomics and friction resistibility is also checked at last. Once all of the balls’ factors are accurate enough to move further, balls are sent away.
Keeping one thing in mind that only that golf ball design that meets all of the qualities mentioned above will be accurate enough to keep your game smooth and your position up.
Conclusion
Wrapping it up with some closing words. We hope that we have mentioned everything that one wants to know about how golf balls are made and their manufacturing process. This article must be of prime importance, especially for those who are related to golf strongly or are golf professionals and those who love to improve their knowledge.
All of the points are discussed in detail in the upper paragraphs, and also we have tried to make your queries clear in the questioning section. Especially if you want to start a job in a golf ball’s manufacturing company, these points must be of great importance. Just invest some time here and read this article in depth.
We look forward to your further queries and questions regarding the golf balls.
Frequently Asked Questions
What are golf balls made of?
Generally, the construction of golf balls includes the usage of plastic and rubber. And if we take a two-piece ball specifically it will contain a rubber core and the outer covering of thermoplastic, i.e. an ionomer.
Firstly, raw rubber block is heated at a specific temperature and then is molded into a specific round or sphere shape.
The core of the golf balls is generally made up of rubber. This rubber is precisely manufactured using a combination of several materials. After the center’s core is done, it is then covered in the thermoplastic layer called surlyn. After this, dimples are also made on the outer surface, and then the surface is neatly painted.
Are golf balls biodegradable?
We don’t think so. None of the rubber or plastic is biodegradable. As you know, both of these materials are used in the manufacturing of golf balls, so they can’t dissolve or vanish in soil.
Why are there dimples on the outermost surface of the golf balls?
The dimples seen on the outer surface of the golf balls are seen. These dimples create a turbulent surface on which air flows easily. This may increase the balls’ speed on the golf ground’s greens and go on smoothly towards the hole. Also, the wake’s size is kept minimal because of these specific dimples on the golf balls’ outermost surface.
Do all balls have the same number of dimples on them?
This question’s answer is still not obvious because some people think golf balls have the same number of dimples. But at some points, it is not that obvious. According to us, the numbers of dimples also vary with the ball’s golf ball and model.
Are low compression golf balls any good?
Low compression balls are usually said to travel more distance as compared to hard golf balls. The reason behind this the driving forces. For the beginners, those with slow speed at the beginning, low compression balls are recommended to demand low energy for going further.
So, specifically talking about the good or bad, we would say that it depends on the player’s level and, of course, the preferences of the player.
Why golf balls are numbered?
The specific numbering on the golf balls does not have any strong theory in them. This numbering is only done to make it easier for the golfers to identify the balls that which ball is theirs. This numbering can be of prime importance when golfers are playing in groups. Intermixing of the balls is avoided by this specific numbering.